Contents
Ballistics Coefficient
The ballistic coefficient is a number that relates the air-drag deceleration of an actual bullet to the air-drag deceleration of a standard bullet. Extensive testing was performed to determine and record these air-drag or retardation values throughout a useful velocity range. These retardation values are then listed in a Retardation Table , or Drag Table( usually in 10 feet per second intervals ).
The most commonly used table is referred to as the G1 table and was tabulated using the retardation values of a projectile weighing l pound, with a diameter of 1 inch and a nose curvature having a radius of 2 calibers ( or two inches ).
A smaller diameter bullet of lesser weight will posses lesser inertia than that of the standard bullet and will not pierce the air as easily as the standard bullet. The result of this condition is that a smaller bullet will posses larger retardation values spanning the useful velocity range than the standard bullet.
If the actual bullet produces retardation values that are double those which the standard bullet produces, then the actual bullet may be compared to the standard bullet with a coefficient number obtained by dividing the retardation rate of the standard bullet by the retardation rate of the actual bullet.
The result of this division is a G1 ballistic coefficient of 0.500 for the actual bullet. [Standard Bullet Retardation] / [Actual Bullet Retardation] = Ballistic Coefficient of the Standard bullet.
This ballistic coefficient is valid only for the G1 Retardation Table and would have no useful application with any other retardation table.
Calculating a ballistic coefficient from the physical description of a bullet requires two values, the Sectional Density of the bullet, which may be directly calculated, and a Form Factor value which may be estimated using the process described in the Form Factor topic.
After these values are determined, the Ballistic Coefficient is easily calculated.
BC = Ballistic Coefficient
SD = Sectional Density
FF = Form Factor
BC = SD / FF
Copyright © 2011. TMT Enterprises. All rights reserved.