Contents - Index - Previous - Next


Vernier Sight Settings and Adjustments



     The left-hand chart displays the path of a bullet with the rifle's rear sight zeroed at a range of 100 yards (91.44 meters). The path, in inches, of the bullet is shown at each consecutive range along with the sight adjustment, in both inches and  Minutes-of-Angle, needed to re-zero  the sight for that particular range.


     The chart on the right indicates the Vernier Sight reading, in both points and in staff markings, that are required to zero the sight at each range shown on the chart. In this instance, the reading of 10 points as the setting for a zero at the 100 yard (91.44 m) range was obtained from the initial Vernier Sight Data entry field on the Data Entry Page.




Copyright 2002-2010.  TMT Enterprises.  All rights reserved.